-->

You can manually download and install the USB 3.0 driver for Windows 10, 8, and 7 computers via visiting the official manufacturer’s support website. Note: To download USB 3.0 driver manually, you can either go to the original PC vendor websites such as HP, Lenovo, Dell, Asus, etc., or to the official device manufacturers such as AMD and Intel. This package supports the following driver models: Intel 82371SB PCI to USB Universal Host Controller; Intel 82371AB PCI to USB Universal Host Controller. In most cases with Windows 7 or 10 manually installing drivers is NOT needed. The USB board is plug and play right out of the package. As long as your PC is connected to the internet, Windows will install the driver automatically. Then check in Windows Device Manager to verify it shows up under Ports. Huawei USB COM 1.0 USB SER USB Driver: Download. How to install Huawei USB Driver. Firstly, you need to download the USB Driver on your Computer. Extract the ADB USB Driver using WinRAR or 7zip. Right-click on my computer and then click on manage. Check on the left side there you can see the Device Manager option.

For certain Universal Serial Bus (USB) devices, such as devices that are accessed by only a single application, you can install WinUSB (Winusb.sys) in the device's kernel-mode stack as the USB device's function driver instead of implementing a driver.

Oppo A71 CPH1717 Mediatek Driver. The Mediatek Driver is compatible with the SP Flash Tool, MTK Flash Tool, SP MDT Tool, and the SN Write Tool and can be useful if you are trying to install firmware (ROM) on the device. Driver Name: Mediatek Driver Package Name: MediatekDriverAutoInstallerv1.1352.zip Driver Size: 9.56 MB.

This topic contains these sections:

Automatic installation of WinUSB without an INF file

As an OEM or independent hardware vendor (IHV), you can build your device so that the Winusb.sys gets installed automatically on Windows 8 and later versions of the operating system. Such a device is called a WinUSB device and does not require you to write a custom INF file that references in-box Winusb.inf.

When you connect a WinUSB device, the system reads device information and loads Winusb.sys automatically.

For more information, see WinUSB Device.

Installing WinUSB by specifying the system-provided device class

Usb-com driver driver download

When you connect your device, you might notice that Windows loads Winusb.sys automatically (if the IHV has defined the device as a WinUSB Device). Otherwise follow these instructions to load the driver:

  1. Plug in your device to the host system.
  2. Open Device Manager and locate the device.
  3. Select and hold (or right-click) the device and select Update driver software... from the context menu.
  4. In the wizard, select Browse my computer for driver software.
  5. Select Let me pick from a list of device drivers on my computer.
  6. From the list of device classes, select Universal Serial Bus devices.
  7. The wizard displays WinUsb Device. Select it to load the driver.

If Universal Serial Bus devices does not appear in the list of device classes, then you need to install the driver by using a custom INF.The preceding procedure does not add a device interface GUID for an app (UWP app or Windows desktop app) to access the device. You must add the GUID manually by following this procedure.

  1. Load the driver as described in the preceding procedure.

  2. Generate a device interface GUID for your device, by using a tool such as guidgen.exe.

  3. Find the registry key for the device under this key:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSB<VID_vvvv&PID_pppp>

  4. Under the Device Parameters key, add a String registry entry named DeviceInterfaceGUID or a Multi-String entry named DeviceInterfaceGUIDs. Set the value to the GUID you generated in step 2.

  5. Disconnect the device from the system and reconnect it to the same physical port.Note If you change the physical port then you must repeat steps 1 through 4.

Writing a custom INF for WinUSB installation

As part of the driver package, you provide an .inf file that installs Winusb.sys as the function driver for the USB device.

The following example .inf file shows WinUSB installation for most USB devices with some modifications, such as changing USB_Install in section names to an appropriate DDInstall value. You should also change the version, manufacturer, and model sections as necessary. For example, provide an appropriate manufacture's name, the name of your signed catalog file, the correct device class, and the vendor identifier (VID) and product identifier (PID) for the device.

Also notice that the setup class is set to 'USBDevice'. Vendors can use the 'USBDevice' setup class for devices that do not belong to another class and are not USB host controllers or hubs.

If you are installing WinUSB as the function driver for one of the functions in a USB composite device, you must provide the hardware ID that is associated with the function, in the INF. You can obtain the hardware ID for the function from the properties of the devnode in Device Manager. The hardware ID string format is 'USBVID_vvvv&PID_pppp'.

The following INF installs WinUSB as the OSR USB FX2 board's function driver on a x64-based system.

Starting in Windows 10, version 1709, the Windows Driver Kit provides InfVerif.exe that you can use to test a driver INF file to make sure there are no syntax issues and the INF file is universal. We recommened that you provide a universal INF. For more information, see Using a Universal INF File.

Only include a ClassInstall32 section in a device INF file to install a new custom device setup class. INF files for devices in an installed class, whether a system-supplied device setup class or a custom class, must not include a ClassInstall32 section.

Except for device-specific values and several issues that are noted in the following list, you can use these sections and directives to install WinUSB for any USB device. These list items describe the Includes and Directives in the preceding .inf file.

  • USB_Install: The Include and Needs directives in the USB_Install section are required for installing WinUSB. You should not modify these directives.

  • USB_Install.Services: The Include directive in the USB_Install.Services section includes the system-supplied .inf for WinUSB (WinUSB.inf). This .inf file is installed by the WinUSB co-installer if it isn't already on the target system. The Needs directive specifies the section within WinUSB.inf that contains information required to install Winusb.sys as the device's function driver. You should not modify these directives.Note Because Windows XP doesn't provide WinUSB.inf, the file must either be copied to Windows XP systems by the co-installer, or you should provide a separate decorated section for Windows XP.

  • USB_Install.HW: This section is the key in the .inf file. It specifies the device interface globally unique identifier (GUID) for your device. The AddReg directive sets the specified interface GUID in a standard registry value. When Winusb.sys is loaded as the device's function driver, it reads the registry value DeviceInterfaceGUIDs key and uses the specified GUID to represent the device interface. You should replace the GUID in this example with one that you create specifically for your device. If the protocols for the device change, create a new device interface GUID.

    Note User-mode software must call SetupDiGetClassDevs to enumerate the registered device interfaces that are associated with one of the device interface classes specified under the DeviceInterfaceGUIDs key. SetupDiGetClassDevs returns the device handle for the device that the user-mode software must then pass to the WinUsb_Initialize routine to obtain a WinUSB handle for the device interface. For more info about these routines, see How to Access a USB Device by Using WinUSB Functions.

The following INF installs WinUSB as the OSR USB FX2 board's function driver on a x64-based system. The example shows INF with WDF coinstallers.

  • USB_Install.CoInstallers: This section, which includes the referenced AddReg and CopyFiles sections, contains data and instructions to install the WinUSB and KMDF co-installers and associate them with the device. Most USB devices can use these sections and directives without modification.

  • The x86-based and x64-based versions of Windows have separate co-installers.

    Note Each co-installer has free and checked versions. Use the free version to install WinUSB on free builds of Windows, including all retail versions. Use the checked version (with the '_chk' suffix) to install WinUSB on checked builds of Windows.

Each time Winusb.sys loads, it registers a device interface that has the device interface classes that are specified in the registry under the DeviceInterfaceGUIDs key.

Note If you use the redistributable WinUSB package for Windows XP or Windows Server 2003, make sure that you don't uninstall WinUSB in your uninstall packages. Other USB devices might be using WinUSB, so its binaries must remain in the shared folder.

How to create a driver package that installs Winusb.sys

To use WinUSB as the device's function driver, you create a driver package. The driver package must contain these files:

  • WinUSB co-installer (Winusbcoinstaller.dll)
  • KMDF co-installer (WdfcoinstallerXXX.dll)
  • An .inf file that installs Winusb.sys as the device's function driver. For more information, see Writing an .Inf File for WinUSB Installation.
  • A signed catalog file for the package. This file is required to install WinUSB on x64 versions of Windows starting with Vista.

Note Make sure that the driver package contents meet these requirements:

  • The KMDF and WinUSB co-installer files must be obtained from the same version of the Windows Driver Kit (WDK).
  • The co-installer files must be obtained from the latest version of the WDK, so that the driver supports all the latest Windows releases.
  • The contents of the driver package must be digitally signed with a Winqual release signature. For more info about how to create and test signed catalog files, see Kernel-Mode Code Signing Walkthrough on the Windows Dev Center - Hardware site.
  1. Download the Windows Driver Kit (WDK) and install it.

  2. Create a driver package folder on the machine that the USB device is connected to. For example, c:UsbDevice.

  3. Copy the WinUSB co-installer (WinusbcoinstallerX.dll) from the WinDDKBuildNumberredistwinusb folder to the driver package folder.

    The WinUSB co-installer (Winusbcoinstaller.dll) installs WinUSB on the target system, if necessary. The WDK includes three versions of the co-installer depending on the system architecture: x86-based, x64-based, and Itanium-based systems. They are all named WinusbcoinstallerX.dll and are located in the appropriate subdirectory in the WinDDKBuildNumberredistwinusb folder.

  4. Copy the KMDF co-installer (WdfcoinstallerXXX.dll) from the WinDDKBuildNumberredistwdf folder to the driver package folder.

    The KMDF co-installer (WdfcoinstallerXXX.dll) installs the correct version of KMDF on the target system, if necessary. The version of WinUSB co-installer must match the KMDF co-installer because KMDF-based client drivers, such as Winusb.sys, require the corresponding version of the KMDF framework to be installed properly on the system. For example, Winusbcoinstaller2.dll requires KMDF version 1.9, which is installed by Wdfcoinstaller01009.dll. The x86 and x64 versions of WdfcoinstallerXXX.dll are included with the WDK under the WinDDKBuildNumberredistwdf folder. The following table shows the WinUSB co-installer and the associated KMDF co-installer to use on the target system.

    Use this table to determine the WinUSB co-installer and the associated KMDF co-installer.

    WinUSB co-installerKMDF library versionKMDF co-installer
    Winusbcoinstaller.dllRequires KMDF version 1.5 or later

    Wdfcoinstaller01005.dll

    Wdfcoinstaller01007.dll

    Wdfcoinstaller01009.dll

    Winusbcoinstaller2.dllRequires KMDF version 1.9 or laterWdfcoinstaller01009.dll
    Winusbcoinstaller2.dllRequires KMDF version 1.11 or laterWdfCoInstaller01011.dll
  5. Write an .inf file that installs Winusb.sys as the function driver for the USB device.

  6. Create a signed catalog file for the package. This file is required to install WinUSB on x64 versions of Windows.

  7. Attach the USB device to your computer.

  8. Open Device Manager to install the driver. Follow the instructions on the Update Driver Software wizard and choose manual installation. You will need to provide the location of the driver package folder to complete the installation.

Related topics

WinUSB Architecture and Modules
Choosing a driver model for developing a USB client driver
How to Access a USB Device by Using WinUSB Functions
WinUSB Power Management
WinUSB Functions for Pipe Policy Modification
WinUSB Functions
WinUSB

Huawei USB Drivers (CDC/ADB/Qualcomm/Kirin/MTK VCOM/USB 1.0) is a very useful program to connect any Huawei Smartphones and Tablets to the computer successfully. Once you have installed, Huawei USB Driver, it creates a bridge that can help to flash/update or upgrade your phone, Also, allows you to browse all Huawei device files like photos, videos, contacts, messages, etc. You can take a backup & can restore your data.

Without installing a USB driver you won’t be able to connect your phone to the computer. That’s why here I share the latest version of Huawei USB driver that you can download from here.

Note: Huawei USB drivers compatible with all versions of Microsoft Windows 7, Windows 8, Windows 10 version (32 & 64bit).

Here we share each and every step which can help you to install every version of the Huawei Honor USB driver to your computer, So, follows the below process to install Huawei CDC/ADB/Qualcomm/Kirin/MTK VCOM/USB 1.0 driver, to your computer.

Read Also: How to Flash Huawei P30 Lite Stock Firmware

Download & Install Huawei USB Drivers:

Huawei Model NameUSB Drivers
Huawei Mate 30 (All)Download
Huawei Mate 20, 20 ProDownload
Huawei mate 20xDownload
Huawei Mate 10 / ProDownload
Huawei P10 LiteDownload
Huawei Mate 8Download
Huawei Mate 9Download
Huawei Mate XDownload
Huawei Mate XsDownload
Huawei P40, P40 ProDownload
Huawei P40 Pro & Pro +Download
Huawei P40 LiteDownload
Huawei P30 LiteDownload
Huawei P Smart ZDownload
Huawei P30, P30 Pro, P30 LiteDownload
Huawei P20, ProDownload
Huawei P20 LiteDownload
Huawei P10/PlusDownload
Huawei P10 LiteDownload
Huawei P Smart + / P Smart ZDownload
Huawei P Smart ZDownload
Huawei Nova 7 & 7 ProDownload
Huawei Nova 7 SEDownload
Huawei Nova 6, Nova 6 5G, Nova 6 SEDownload
Huawei Nova 5i / 5i Pro / 7iDownload
Huawei 7iDownload
Huawei Nova 5 / 5 ProDownload
Huawei Enjoy 10, 10 PlusDownload
Huawei Enjoy 10sDownload
Huawei Enjoy 9 / 9S / 9eDownload
Huawei Y9/ Y9 Prime 2019Download
Huawei Y7 Pro / Y9sDownload
Huawei Y9sDownload
Huawei Magic 2Download
Huawei Mediapad smartphonesDownload
Huawei Universal USB Drivers [Any Huawei Model]Download
Huawei ADB DriverDownload
Huawei CDC DriverDownload

Download Honor USB Drivers for Windows

Honor Model NameUSB Drivers
Honor 30/ 30 ProDownload
Honor 30 Pro+Download
Honor 20, 20 ProDownload
Honor X10Download
Honor 20 LiteDownload
Honor 20iDownload
Honor 10, 10iDownload
Honor 10 LiteDownload
Honor 9,9 LiteDownload
Honor 9iDownload
Honor 9NDownload
Honor V30, V30 ProDownload
Honor V20 / View 20Download
Honor View 10 / V10Download
Honor 9X / 9X Pro / 9X LiteDownload
Honor 8X / 8X Max / 8CDownload
Honor 30sDownload
Honor 20sDownload
Honor Play 9ADownload
Honor Play 4T, 4T ProDownload
Honor Play 3Download
Honor Play 3eDownload
Honor Play 8ADownload
Honor Universal USB Drivers [Any Model]Download
Honor ADB DriverDownload
Honor CDC DriverDownload

Huawei USB COM 1.0 USB SER USB Driver: Download

How to install Huawei USB Driver

  • Firstly, you need to download the USB Driver on your Computer.
  • Extract the ADB USB Driver using WinRAR or 7zip.
  • Right-click on my computer and then click on manage.
  • Check on the left side there you can see the Device Manager option.

OR

  • Click on the search bar and search Device Manager there.
  • Choose the first result from there.
  • Then click on Action and then click on Add legacy hardware there.
  • After that, click on Next and then choose to Install the hardware that I manually select from the list (Advanced) then click on Next.
  • Now tap on Show all devices, then click on Next & click on Have disk.
  • Click on Browse then choose the Huawei USB driver file you downloaded and extracted and click on the OK button.
  • Then choose the Android USB interface and click on Next.
  • Now the Huawei USB driver installation starts, click on Next, then click on Finish.

How to Install Huawei ADB Driver:

  • Download the USB Driver first.
  • Then open the device manager in your pc.
  • Then click on Action and choose Add Legacy Hardware and click on Next.
  • Now choose to Install the hardware that I manually select from the list (Advanced) and then click on Next.
  • Then Tap on Show All Devices and click on Next.
  • Now click on Have disk.
  • Select Browse Choose the Huawei ADB USB driver file you downloaded and then click on OK.
  • Then choose the ADB Interface and click on Next.
  • Now the Huawei USB driver installation starts, click on Next, then click on Finish.
  • Then restart your device once if you are still getting an error.

How to Install Huawei Qualcomm USB Driver

  • First, download the USB driver file package on your PC.
  • Then Open the Qualcomm USB Driver Setup File.exe.
  • After that, choose WWAN DHCP is not used to get IPAddress And then Click on Next.
  • Again tap on Next button.
  • Choose I accept the terms in the license agreement and click on Next.
  • Click on Install to start the installation process.
  • Click Finish to successfully install Huawei Qualcomm Driver on your PC.

How to Install Huawei CDC Driver

  • First, open the control panel of your PC.
  • Launch Device Manager from there.

Usb Driver Driver Windows 7

  • Then Click on Action & Choose Add Legacy Hardware and click Next.
  • Choose to install the hardware manually from a list and click Next.
  • Now Choose “Show all devices” and click Next.
  • A window will open up. select the CDC driver folder you downloaded and click Ok.
  • Then click “Next” to start the hardware installation process.
  • Wait until the installation process gets finished.
  • Then you will see the massage of Completing the Add Hardware Wizard. Click on Finish.
  • This is how you can install Huawei CDC Driver on your PC.

How to Install Huawei VCOM Driver

  • Open the Control Panel and choose the Device Manager option.
  • Then right-click on your username and select Add Legacy hardware.
  • Then click on the Next button.
  • Now select Install the hardware that I manually select from a list (Advanced) and click on the Next button.
  • After that, tap on Show All Devices and click on the Next button.
  • Then click on Have Disk and select .inf file that you already downloaded & click on Next.
  • That’s it, Your Huawei VCOM Driver are successfully installed on your PC.

How to Install Huawei USB COM 1.0 USB SER Driver

First of all, you have to enable test mode on your Windows computer to successfully install the Huawei USB COM 1.0 USB SER Driver, USB COM 1.0 driver mainly help to detect the Huawei Honor phone for flashing and unlocking

Usb-com Driver Driver Updater

  • Search for CMD on your Windows PC
  • Select CMD from the search results
  • Righ-Click on that and select Run As Administrator
  • Copy the Code: bcdedit /set testsigning on
  • Paste it to your CMD and Hit enter
  • Now Restart your Windows Computer.
  • Then You can see the “Test Mode” is enabled on your Windows computer.
  • Now, Install the Huawei USB COM 1.0 USB SER Driver by following the above Huawei CDC Driver installation process on your computer.

If you want to disable the test mode on your windows computer then follow the above process and replace the code with the below-provided code, Restart your PC.

  • bcdedit /set testsigning off

Well, If you followed all the above process very carefully, I assure you you will be able to install All Huawei USB drivers (CDC/ADB/Qualcomm/Kirin/MTK VCOM/USB 1.0) on your PC.

Usb-com Driver Driver Salary

If you still stuck or could not understand anything relating to this topic, you can let us know in the comment section below. we will help you as soon as possible. Thanks a lot for visiting.

Coments are closed
Scroll to top