Download

Here is a complete list of Sweex router passwords and usernames. Find Sweex router passwords and usernames using this router password list for Sweex routers. Network Utilities. Sweex is for people who are looking for the perfect match of user friendliness and products that meet their vibrant identities. Always seeking for new opportunities to stay connected. Sweex matches those desires in smart media solutions. English version Click on the “Site Survey” tab in order to view a list of wireless networks detected by your computer. In our example, the “Sweex” network has been found. In your situation, the detected networks will differ from this picture.

Sweex network & wireless cards driver downloadsNetwork

Here you can find the default IP address and the username and password for the user interface of the Sweex LW050V2 Wireless 54G router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.50.1
Username:
sweex
Password:
mysweex

Preconfigured Wi-Fi settings

SSID:
Sweex LW050v2
Password:
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Sweex LW050V2, you have to do the following steps for access:

  1. Turn on router
  2. Connect the device via Wi-Fi* or a network cable with the router
  3. Start web browser
  4. Insert IP address in the address bar and confirm with ‘Enter’ button
  5. Enter username and password in the open user interface and confirm again
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Sweex LW050V2 to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press Reset button and hold for at least 10 seconds
  3. Restart of the device is automatically executed
  4. Restoration of standard settings is finished

Execute software reset

With the Sweex LW050V2, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.

Here you can find the default IP address and the username and password for the user interface of the Sweex LW160 Wireless 150N router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

Driver
IP address:
192.168.16.1
Username:
sweex
Password:
mysweex

Preconfigured Wi-Fi settings

Sweex network & wireless cards driver downloads

Sweex Network & Wireless Cards Driver Downloads

SSID:
starts with SWEEX_
Password:
on a sticker on the router’s case

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Sweex LW160, you have to do the following steps for access:

  1. Turn on router
  2. Connect the device via Wi-Fi* or a network cable with the router
  3. Open browser
  4. Enter IP address in the address bar and then confirm with ‘Enter’ key
  5. Enter username as well as password in the login form and confirm
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

Sweex Network & Wireless Cards Driver Download

To reset the Sweex LW160 to its default settings, you have to do the following steps:

  1. Put router into operation
  2. For at least 15 seconds, press the WPS button
  3. Restart of the device is automatically executed
  4. Default settings have been restored

Execute software reset

With the Sweex LW160, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.

Coments are closed
Scroll to top