Solution 2: Uninstall HID-Compliant Mouse Driver. Just as discussed before, if your Logitech HID-compliant mouse driver is missing or corrupted on Windows 10, the HID-compliant mouse cannot work, too. In this way, you should uninstall the HID mouse driver in device manager and then download and install the HID-compliant mouse latest driver.
MouClassInputInjection implements a kernel interface for injecting mouse input data packets into the input data stream of HID USB mouse devices. The MouClass Input Injection module injects input by invoking a mouse class service callback to copy synthesized packets to the mouse class data queue in the target HID USB mouse device stack. Quadrature devices use two input pins per device, and optical devices will require GND and 5V pins. Mechanical encoders require GND only, and this is the center pin on 3-pin devices. Windows allows one instance of each axis when defined as Mouse (ie X, Y, Z) but if you are using multiple U-HID boards, Windows can recognise each board as a. Re: I2C HID Device Driver I have installed Intel chipset device but it doesn't work, and I have also tried other alternative of a reboot, but still, I2C HID Device is not working. Sometimes this device starts working well like yesterday it was working, and then when I switch on my pc today again, it stops working.
The Microsoft Mouse and Keyboard Center is an app that helps you make the most out of your Microsoft keyboard and mouse. Mouse and Keyboard Center helps you personalize and customize how you work on your PC.
This app is not available for Windows 10 in S mode.
Download the latest release of Mouse and Keyboard Center:
Latest release: Mouse and Keyboard Center 13
This latest release supports these new devices:
Microsoft Bluetooth Ergonomic Mouse
Microsoft Designer Compact Keyboard
Microsoft Number Pad
What's new or improved
This latest release includes these new features or improvements:
Smart Switch now supports both mouse and keyboard.
Use Spotlight to show people what you're talking about during an online meeting—just click your mouse to put a spotlight on part of your screen.
The U-Config Configuration utility
This utility is used for the following:
- Assigning a board number (1-8) if you have multiple boards.
- Configuring each pin of the board as the correct device type, ie keyboard, gamepad, analog, quadrature mouse, power.
- Configuring each pin with the correct keycode, button number, axis or other parameter
- Configuring analog axis scale factor and offset
- Initiating a firmware upgrade
- Downloading a configuration 'on the fly' using a command-line task
The graphical picture of the board shows the way in which the pins are divided into sections, each being one 9-pin connector (plus key). Pin 1 is the key and pin2 is ground.The utility interacts with the board in real time, every time a change is made.The configuration is stored in flash ROM on the board so it remains after power off/on.When the utility is run, it reads the configuration from the connected board(s) and displays it.
You can also store the entire configuration as a file for later downloading on-the-fly for multiple configurations.
Function of each GUI feature:
GENERAL tab (main window)
PIN drop down
This displays the selected pin you are configuring. You can select pins from here or from the main graphic.
You can type text in here which will remind you of which device this pin is connected to. The test is saved with the configuration (on the PC only) and is not sent to the board.
Here you configure the selected pin as the required device type and assign values to it.You can select one of the radio buttons to define the pin as the following:
Switch (which includes keyboard key, gamepad button and mouse buttons)
Quadrature Mouse (includes trackballs, optical steering wheels etc)
Analog (Gamepad type control)
LED output (includes U-HID and PC Controlled)
+5 Volts out (max 30 ma)
This button applies the changes you have made to the pin.
You can click on any pin on the graphic to start configuration of this pin. Additionally, if you click on the pin types listed in the center of the PCB, this will show which pins are allowed to be configured as this type of control.You will notice that certain pins on P7 are fixed. These are high-current power/ground pins and are hard-wired and cannot be changed.Each 10-pin connector area has one hard-wired ground pin.
This tab allows you to set scale factor and offset for each analog input. The default values give a full-scale travel with the cross-hair centered at mid-position of the pot. It may be necessary to experiment with these settings and you can observe the result by opening Control Panel, Game Controllers in Windows, and clicking on the came controller device to display the calibration screen.
In addition the Calibration tab also contains the setting for Quadrature Button press time (U-HID Only). This is the length of time (actually the number of USB packets) which the game controller button is pressed for when using Quadrature Buttons. This is a global setting.
On the BlueHID board, Power Saving mode configuration is set here. Refer to the BlueHID manual for full details of power saving features.
The slider defines how many seconds of no-activity elapse before the board disconnects the Bluetooth link. Or you can opt to have the board never disconnect but this will consume more battery power
Wake Any Pin button
After disconnection, the board will wake and re-connect if activity is detected on any pin which is defined as a switch.
Wake J2-6 Only Button
When this is selected, the board will only wake when activity is detected on pin J2-6. In this mode (Stop Mode) the board is in maximum power-saving state.
Self-Test LED The self-test on-board LED can be disabled. This is recommended after testing is complete, to conserve power.
Detail Configuration Example (Switch)
The screenshot above shows this configuration.
We will look at how a switch is connected and configured.
Firstly, the switch is connected with one terminal routing to the appropriate pin and the other to a ground pin.
Then, select the pin by clicking on it in the graphic area.
Select the 'Switch' radio button in the Function area.
You now need to select what type of control this will be, whether a mouse button, keyboard key or gamepad button. Lets select keyboard key.
In the Primary drop-down, all possible keyboard keys will be available, plus macros. Macros are defined separately, see later.
Select which keyboard key you need. Note that the U-HID sends key scan codes, just like a keyboard. It does not send characters so has no concept of upper/lower case. An upper-case character is two keys (ie shift and the character key). There is no need to assign a secondary code unless you wish to use the shift feature or other special functions, see later.
Then, you need to tell the board how and when to send the keycode you have chosen. This is done with the Down and Up Action drop downs. These can be selected as follows:
This removes the keycode associated with this pin from the buffer, so it is no longer sent
This sends (and holds) the primary keycode you selected above, to the PC. If the U-HID Shift button is pressed, it will send the secondary code instead.
This sends (and holds) the secondary keycode but you have not assigned one at this point so no action.
This sends a short pulse, simulating the key being pressed then released, even though it might still be physically closed (eg a toggle switch left closed)
This is the same as above but pulses the secondary code.
This is not explicitly an option, but is the result of setting both the Down and Up actions to Normal Primary. This will cause the selected keycode to alternately be sent or not sent on alternate button presses.
This is not explicitly an option but is the result of setting Down action to Secondary and Up action to Primary. This will cause the primary or secondary key to be sent on alternate button presses.
This is not explicitly an option but is the result of setting Down action to Primary and Up action to Secondary. This will cause the primary key to be sent on press and secondary on release. Normal or Pulse mode can be used.
The most common usage of keyboard keys is to set Down Action to Normal Primary and Up Action to Clear.
Important Note about keyboard keycodes: On USB keyboards (and therefore the U-HID) the auto-repeat of the keyboard is done in Windows. So if you assign any keycode to be pressed permanently (which can occur in many configurations) you will get an endless string of characters in your application. For this reason, many of the advanced combinations should only be used with gamepad buttons, which do not have a problem being held in the pressed position.
You should also avoid defining any keyboard keys from being 'pressed' by default as this will cause boot failures (stuck key) and may cause unexpected problems in the Windows GUI.
Other switch types:
You can select left, middle, right and left double-click from the drop-down.
These are numbered 1-32 as shown in 'Control Panel, Game Controllers'.
Quadrature Mouse Selection
This selection always uses two pins. When you assign the pin as this device type, the opposite pin will also automatically be assigned.
You can select X, Y or Z (wheel) axis.
Trackballs use two axes (4 pins).
Quadrature Button Selection
This selection uses two pins. When you assign the pin as this device type, the opposite pin will also automatically be assigned.
You can select one of 8 pairs of game controller buttons which will be pressed repeatedly when the encoder is turned. Note you can configure the 'press' time on the Calibration tab.
These are numbered 1-8. You can view analog axes using Control Panel, Game Controllers.
The first two axes are displayed as X and Y.
There are two types of LED.
U-HID controlled (switch)
This type of LED is switched on when the switch allocated to it is sending its keycode or button (which might not necessarily mean the switch is physically closed, depending on how the switch pin is configured).
In the drop-down, you can select which switch (referenced by its pin) controls this LED.
PC Controlled LED
This type of LED is switched on/off by a PC application. These are numbered 1-16.
These selections allow loading/saving of .HID configuration files, so you can have multiple saved configurations.
You can import and export configurations to a CSV or XML file so you can edit them outside of the application or generate using a different application.
This is an important first step when you are using more than one board. You will need to connect ONE board, and assign it as number 2 or higher. Once all boards are assigned with different IDs, they can all be connected to their own USB ports. You can check which board is which by opening Control Panel, Game Controllers. The board ID# is displayed a the top of each Game Controller window.
Multi-monitor Usb Mouse Hid Input Devices Driver Download Windows 7
This initiates a firmware upgrade. The board assumes a different USB ID and a driver will be installed. Details will be included with firmware.
There is only one option, 'View U-HID Shift Option'. This is normally hidden in the main area to avoid clutter.
This is only used when assigning a pin to be a U-HID shift key.
The shift option allocates a key (or keys) which, when held, cause other pressed keys to send their secondary instead of primary keycodes. This over-rides the Primary/Secondary Action defined for keys.