1. Drivers Usb Compliance Mobile Phones & Portable Devices Am Fm
  2. Drivers Usb Compliance Mobile Phones & Portable Devices External
  3. Drivers Usb Compliance Mobile Phones & Portable Devices Download
Google is committed to advancing racial equity for Black communities. See how.

Poly offers the broadest set of Microsoft Teams phones, powered by innovative technologies that reduce noise and enhance sound. And these capabilities come in phones with attractive ergonomic designs and intuitive user interfaces. From a conference phone to a desktop phone, a speakerphone, or a station for your smartphone, Poly has you covered. A passive 11-pin cable can be used with second-generation Samsung mobile devices. StarTech.com 5-pin and 11-pin adapters have a micro-USB receptacle to provide additional power to the mobile device. You can use a standard micro-USB cable with a USB charger to power the converter. If you don't have a mobile phone policy at work, this guide will help you draw one up. And if you do already have one we're sure you'll find something useful here to add to your policy. Mobile phones—especially smartphones—have been part of the cultural reshaping of the workplace over the last decade. Mobile and Smart Phones; MP3 Players; Handheld Devices; open-in-new Find other Battery charger ICs Description. The bq24153A/6A/8/9 is a compact, flexible, high-efficiency, USB-friendly switch-mode charge management device for single-cell Li-ion and Li-polymer batteries used in a wide range of portable applications. Today, 64% of U.S. Employees say they access their organization's customer, partner, and employee data while on their mobile device, according to a recent Lookout survey. This means that mobile devices are accessing the types of data protected by GDPR and other regulations. CISOs must account for these endpoints when building compliance strategies.

Drivers Usb Compliance Mobile Phones & Portable Devices Am Fm

This article reviews Android support for USB digital audio and relatedUSB-based protocols.

Audience

The target audience of this article is Android device OEMs, SoC vendors,USB audio peripheral suppliers, advanced audio application developers,and others seeking detailed understanding of USB digital audio internals on Android.

End users of Nexus devices should see the articleRecord and play back audio using USB host modeat theNexus Help Center instead.Though this article is not oriented towards end users,certain audiophile consumers may find portions of interest.

Overview of USB

Universal Serial Bus (USB) is informally described in the Wikipedia articleUSB,and is formally defined by the standards published by theUSB Implementers Forum, Inc.For convenience, we summarize the key USB concepts here,but the standards are the authoritative reference.

Basic concepts and terminology

USB is a buswith a single initiator of data transfer operations, called the host.The host communicates withperipherals via the bus.

Note: The terms device and accessory are common synonyms forperipheral. We avoid those terms here, as they could be confused withAndroid deviceor the Android-specific concept calledaccessory mode.

A critical host role is enumeration:the process of detecting which peripherals are connected to the bus,and querying their properties expressed via descriptors.

A peripheral may be one physical objectbut actually implement multiple logical functions.For example, a webcam peripheral could have both a camera function and amicrophone audio function.

Each peripheral function has an interface thatdefines the protocol to communicate with that function.

The host communicates with a peripheral over apipeto an endpoint,a data source or sinkprovided by one of the peripheral's functions.

There are two kinds of pipes: message and stream.A message pipe is used for bi-directional control and status.A stream pipe is used for uni-directional data transfer.

The host initiates all data transfers,hence the terms input and output are expressed relative to the host.An input operation transfers data from the peripheral to the host,while an output operation transfers data from the host to the peripheral.

There are three major data transfer modes:interrupt, bulk, and isochronous.Isochronous mode will be discussed further in the context of audio.

The peripheral may have terminals that connect to the outside world,beyond the peripheral itself. In this way, the peripheral servesto translate between USB protocol and 'real world' signals.The terminals are logical objects of the function.

Android USB modes

Development mode

Development mode has been present since the initial release of Android.The Android device appears as a USB peripheralto a host PC running a desktop operating system such as Linux,Mac OS X, or Windows. The only visible peripheral function is eitherAndroid fastbootorAndroid Debug Bridge (adb).The fastboot and adb protocols are layered over USB bulk data transfer mode.

Host mode

Host mode is introduced in Android 3.1 (API level 12).

As the Android device must act as host, and most Android devices includea micro-USB connector that does not directly permit host operation,an on-the-go (OTG) adaptersuch as this is usually required:

Figure 1. On-the-go (OTG) adapter

An Android device might not provide sufficient power to operate aparticular peripheral, depending on how much power the peripheral needs,and how much the Android device is capable of supplying. Even ifadequate power is available, the Android device battery charge maybe significantly shortened. For these situations, use a poweredhub such as this:

Figure 2. Powered hub

Accessory mode

Accessory mode was introduced in Android 3.1 (API level 12) and back-ported to Android 2.3.4.In this mode, the Android device operates as a USB peripheral,under the control of another device such as a dock that serves as host.The difference between development mode and accessory modeis that additional USB functions are visible to the host, beyond adb.The Android device begins in development mode and thentransitions to accessory mode via a re-negotiation process.

Accessory mode was extended with additional features in Android 4.1,in particular audio described below.

USB audio

USB classes

Each peripheral function has an associated device class documentthat specifies the standard protocol for that function.This enables class compliant hosts and peripheral functionsto inter-operate, without detailed knowledge of each other's workings.Class compliance is critical if the host and peripheral are provided bydifferent entities.

The term driverless is a common synonym for class compliant,indicating that it is possible to use the standard features of such aperipheral without requiring an operating-system specificdriver to be installed.One can assume that a peripheral advertised as 'no driver needed'for major desktop operating systemswill be class compliant, though there may be exceptions.

USB audio class

Here we concern ourselves only with peripherals that implementaudio functions, and thus adhere to the audio device class. There are twoeditions of the USB audio class specification: class 1 (UAC1) and 2 (UAC2).

Comparison with other classes

USB includes many other device classes, some of which may be confusedwith the audio class. Themass storage class(MSC) is used forsector-oriented access to media, whileMedia Transfer Protocol(MTP) is for full file access to media.Both MSC and MTP may be used for transferring audio files,but only USB audio class is suitable for real-time streaming.

Audio terminals

The terminals of an audio peripheral are typically analog.The analog signal presented at the peripheral's input terminal is converted to digital by ananalog-to-digital converter(ADC),and is carried over USB protocol to be consumed bythe host. The ADC is a data sourcefor the host. Similarly, the host sends adigital audio signal over USB protocol to the peripheral, where adigital-to-analog converter(DAC)converts and presents to an analog output terminal.The DAC is a sink for the host.

Channels

A peripheral with audio function can include a source terminal, sink terminal, or both.Each direction may have one channel (mono), two channels(stereo), or more.Peripherals with more than two channels are called multichannel.It is common to interpret a stereo stream as consisting ofleft and right channels, and by extension to interpret a multichannel stream as havingspatial locations corresponding to each channel. However, it is also quite appropriate(especially for USB audio more so thanHDMI)to not assign any particularstandard spatial meaning to each channel. In this case, it is up to theapplication and user to define how each channel is used.For example, a four-channel USB input stream might have the first threechannels attached to various microphones within a room, and the finalchannel receiving input from an AM radio.

Isochronous transfer mode

USB audio uses isochronous transfer mode for its real-time characteristics,at the expense of error recovery.In isochronous mode, bandwidth is guaranteed, and data transmissionerrors are detected using a cyclic redundancy check (CRC). But there isno packet acknowledgement or re-transmission in the event of error.

Isochronous transmissions occur each Start Of Frame (SOF) period.The SOF period is one millisecond for full-speed, and 125 microseconds forhigh-speed. Each full-speed frame carries up to 1023 bytes of payload,and a high-speed frame carries up to 1024 bytes. Putting these together,we calculate the maximum transfer rate as 1,023,000 or 8,192,000 bytesper second. This sets a theoretical upper limit on the combined audiosample rate, channel count, and bit depth. The practical limit is lower.

Within isochronous mode, there are three sub-modes:

  • Adaptive
  • Asynchronous
  • Synchronous

In adaptive sub-mode, the peripheral sink or source adapts to a potentially varying sample rateof the host.

In asynchronous (also called implicit feedback) sub-mode,the sink or source determines the sample rate, and the host accommodates.The primary theoretical advantage of asynchronous sub-mode is that the sourceor sink USB clock is physically and electrically closer to (and indeed maybe the same as, or derived from) the clock that drives the DAC or ADC.This proximity means that asynchronous sub-mode should be less susceptibleto clock jitter. In addition, the clock used by the DAC or ADC may bedesigned for higher accuracy and lower drift than the host clock.

In synchronous sub-mode, a fixed number of bytes is transferred each SOF period.The audio sample rate is effectively derived from the USB clock.Synchronous sub-mode is not commonly used with audio because bothhost and peripheral are at the mercy of the USB clock.

The table below summarizes the isochronous sub-modes:

Sub-modeByte count
per packet
Sample rate
determined by
Used for audio
adaptivevariablehostyes
asynchronousvariableperipheralyes
synchronousfixedUSB clockno

In practice, the sub-mode does of course matter, but other factorsshould also be considered.

Android support for USB audio class

Development mode

USB audio is not supported in development mode.

Host mode

Android 5.0 (API level 21) and above supports a subset of USB audio class 1 (UAC1) features:

  • The Android device must act as host
  • The audio format must be PCM (interface type I)
  • The bit depth must be 16-bits, 24-bits, or 32-bits where24 bits of useful audio data are left-justified within the most significantbits of the 32-bit word
  • The sample rate must be either 48, 44.1, 32, 24, 22.05, 16, 12, 11.025, or 8 kHz
  • The channel count must be 1 (mono) or 2 (stereo)

Perusal of the Android framework source code may show additional codebeyond the minimum needed to support these features. But this codehas not been validated, so more advanced features are not yet claimed.

Accessory mode

Android 4.1 (API level 16) added limited support for audio playback to the host.While in accessory mode, Android automatically routes its audio output to USB.That is, the Android device serves as a data source to the host, for example a dock.

Accessory mode audio has these features:

  • The Android device must be controlled by a knowledgeable host thatcan first transition the Android device from development mode to accessory mode,and then the host must transfer audio data from the appropriate endpoint.Thus the Android device does not appear 'driverless' to the host.
  • The direction must be input, expressed relative to the host
  • The audio format must be 16-bit PCM
  • The sample rate must be 44.1 kHz
  • The channel count must be 2 (stereo)

Accessory mode audio has not been widely adopted,and is not currently recommended for new designs.

Applications of USB digital audio

As the name indicates, the USB digital audio signal is representedby a digital data streamrather than the analogsignal used by the common TRS miniheadset connector.Eventually any digital signal must be converted to analog before it can be heard.There are tradeoffs in choosing where to place that conversion.

A tale of two DACs

In the example diagram below, we compare two designs. First we have amobile device with Application Processor (AP), on-board DAC, amplifier,and analog TRS connector attached to headphones. We also consider amobile device with USB connected to external USB DAC and amplifier,also with headphones.

Drivers Usb Compliance Mobile Phones & Portable Devices

Figure 3. Comparison of two DACs

Which design is better? The answer depends on your needs.Each has advantages and disadvantages.

Note: This is an artificial comparison, sincea real Android device would probably have both options available.

The first design A is simpler, less expensive, uses less power,and will be a more reliable design assuming otherwise equally reliable components.However, there are usually audio quality tradeoffs vs. other requirements.For example, if this is a mass-market device, it may be designed to fitthe needs of the general consumer, not for the audiophile.

In the second design, the external audio peripheral C can be designed forhigher audio quality and greater power output without impacting the cost ofthe basic mass market Android device B. Yes, it is a more expensive design,but the cost is absorbed only by those who want it.

Mobile devices are notorious for having high-densitycircuit boards, which can result in more opportunities forcrosstalkthat degrades adjacent analog signals. Digital communication is less susceptible tonoise,so moving the DAC from the Android device A to an external circuit boardC allows the final analog stages to be physically and electricallyisolated from the dense and noisy circuit board, resulting in higher fidelity audio.

On the other hand,the second design is more complex, and with added complexity come moreopportunities for things to fail. There is also additional latencyfrom the USB controllers.

Host mode applications

Typical USB host mode audio applications include:

  • music listening
  • telephony
  • instant messaging and voice chat
  • recording

Drivers Usb Compliance Mobile Phones & Portable Devices External

For all of these applications, Android detects a compatible USB digitalaudio peripheral, and automatically routes audio playback and captureappropriately, based on the audio policy rules.Stereo content is played on the first two channels of the peripheral.

There are no APIs specific to USB digital audio.For advanced usage, the automatic routing may interfere with applicationsthat are USB-aware. For such applications, disable automatic routingvia the corresponding control in the Media section ofSettings / Developer Options.

Debugging while in host mode

While in USB host mode, adb debugging over USB is unavailable.See section Wireless usageofAndroid Debug Bridgefor an alternative.

Implementing USB audio

Recommendations for audio peripheral vendors

In order to inter-operate with Android devices, audio peripheral vendors should:

  • design for audio class compliance;currently Android targets class 1, but it is wise to plan for class 2
  • avoid quirks
  • test for inter-operability with reference and popular Android devices
  • clearly document supported features, audio class compliance, power requirements, etc.so that consumers can make informed decisions

Recommendations for Android device OEMs and SoC vendors

In order to support USB digital audio, device OEMs and SoC vendors should:

  • design hardware to support USB host mode
  • enable generic USB host support at the framework levelvia the android.hardware.usb.host.xml feature flag
  • enable all kernel features needed: USB host mode, USB audio, isochronous transfer mode;see Android Kernel Configuration
  • keep up-to-date with recent kernel releases and patches;despite the noble goal of class compliance, there are extant audio peripheralswith quirks,and recent kernels have workarounds for such quirks
  • enable USB audio policy as described below
  • add audio.usb.default to PRODUCT_PACKAGES in device.mk
  • test for inter-operability with common USB audio peripherals

How to enable USB audio policy

To enable USB audio, add an entry to theaudio policy configuration file. This is typicallylocated here:

The pathname component 'oem' should be replaced by the nameof the OEM who manufactures the Android device,and 'codename' should be replaced by the device code name.

An example entry is shown here:

Source code

The audio Hardware Abstraction Layer (HAL)implementation for USB audio is located here:

The USB audio HAL relies heavily ontinyalsa, described at Audio Terminology.Though USB audio relies on isochronous transfers,this is abstracted away by the ALSA implementation.So the USB audio HAL and tinyalsa do not need to concernthemselves with this part of USB protocol.

Drivers Usb Compliance Mobile Phones & Portable Devices Download

Testing USB audio

For information on CTS testing for USB audio, see USB Audio CTS Verifier Tests.

Coments are closed
Scroll to top