1. Drivers Simple Steps
  2. Drivers Simple Steps
  3. Drivers Simple Step Stool

If you’re using the Free version of Driver Easy 5.6.x, follow the steps below to update the drivers: 1) Use Driver Easy to scan your computer. (Check this instruction for more details on how to scan with Driver Easy.) 2) Click the Update button next to the driver you’re going to update. 3) Select Manually Create and click Continue. Install outdated drivers manually, and you are all set. That’s it, using these simple steps you can easily and quickly update & download Realtek HD Audio Drivers in Windows 10. If you still have any doubts and want our help, feel free to drop your questions in the comments section. In most states, driver’s licenses require renewal every four years. If you received your first driver’s license at the standard age of sixteen, this means that you will be required to renew your license at the age of twenty. Install the network driver on the computer. Install Drivers with Driver Talent Without Internet. If you need to install more than just network driver after a clean install of Windows system, you are suggested to install drivers without internet in a more intelligent way: using Driver Talent for Network Card. The program is especially.

The SilentStepStick is a stepper driver board for 2-phase motors, based on the TMC2100, TMC2130, TMC2208, TMC2209 or TMC5160. The driver boards are compatible with StepSticks of the same familiar size and drop-in replacements for some of them.

Special Features

  • MicroPlyer™
  • SpreadCycle™
  • StealthChop™
  • microstep table
  • CoolStep™
  • passive braking
  • short detection
  • Stall detection
  • StallGuard2™
  • StealthChop2™
  • StallGuard4™
TMC SilentStepStick (TMC2100)
TMC SilentStepStick SPI (TMC2130)
TMC2208 SilentStepStick
TMC5160 SilentStepStick
TMC2209 SilentStepStick
Statusactiveactiveactiveactiveactive
Motor Supply5.5…46V5.5…46V5.5…36V10…35V4.75…29V
Phase Current, RMS0.96A0.96A1.2A3.0A1.7A
Microsteps1…2561…2561…2561…2561…256
Step/Dir
SPI
UART
MicroPlyer™
microstep table
SpreadCycle™
StealthChop™
CoolStep™
passive braking
short detection
Stall detection
StallGuard2™
StealthChop2™
StallGuard4™

Drawings

Type
Date
TMC SilentStepStick (TMC2100) Schematics 480 KBDec 22, 2017, 8:55 AM
TMC SilentStepStick SPI (TMC2130) Schematics 69 KBDec 22, 2017, 8:54 AM
TMC2208 SilentStepStick Schematics 66 KBDec 22, 2017, 8:53 AM
TMC5160 SilentStepStick Schematics 40 KBFeb 18, 2019, 4:30 PM
TMC2209 SilentStepStick Schematics 2.5 MBMar 25, 2020, 5:02 PM

Datasheet

Type
Date
TMC5160 SilentStepStick Datasheet 1.0 MBAug 13, 2020, 9:42 AM
TMC2209 SilentStepStick Datasheet 1.0 MBAug 13, 2020, 9:41 AM

PCNs

Type
Date
PCN 2019-08-02 Hardware Change TMCx160A 480 KBNov 29, 2019, 11:09 AM
From basic questions to complex issues, our experts help you find the right solution. Use the technical support form and tell us what you need to get moving.
TMC SILENTSTEPSTICK
Stock
Packaging
Digi-Key 7421Bulk
Farnell 371-
Mouser 891-
TMC SILENTSTEPSTICK SPI
Stock
Packaging
Digi-Key 3691Bulk
Farnell 1441-
Mouser 1311-
Distrelec 531-
TMC2208 SILENTSTEPSTICK
Drivers Simple steps
Stock
Packaging
Digi-Key 4571Bulk
Farnell 871-
Symmetry Electronics 78--
Distrelec 231-
TMC5160 SILENTSTEPSTICK
Stock
Packaging
Digi-Key 1821Bulk
Farnell 2281-
Mouser 131-
TMC2209 SILENTSTEPSTICK
Stock
Packaging
Digi-Key 4291Box
Mouser 851-
Distrelec 671-
Discover now

Please generate a Trinamic ID first or Login In .

Stepper motor drivers are specifically designed to drive stepper motors, which are capable of continuous rotation with precise position control, even without a feedback system. Our stepper motor drivers offer adjustable current control and multiple step resolutions, and they feature built-in translators that allow a stepper motor to be controlled with simple step and direction inputs. These modules are generally basic carrier boards for a variety of stepper motor driver ICs that offer low-level interfaces like inputs for directly initiating each step. An external microcontroller is typically required for generating these low-level signals.

Drivers simple steps

Most of our stepper motor drivers are available in compact (0.6″×0.8″), pin-compatible form factors. The following table compares our selection of these:


A4988
(original)

A4988,
Black Ed.

DRV8825

DRV8834

DRV8880

MP6500,
Pot. CC

MP6500,
Digital CC

TB67S279­FTG

TB67S249­FTG

STSPIN­820

STSPIN­220
Driver chip:A4988DRV8825DRV8834DRV8880MP6500TB67S279­FTGTB67S249­FTGSTSPIN­820STSPIN­220
Min operating voltage:8 V8.2 V2.5 V6.5 V4.5 V10 V10 V7 V1.8 V
Max operating voltage:35 V45 V10.8 V45 V35 V47 V47 V45 V10 V
Max continuous current per phase:(1)1 A1.2 A1.5 A1.5 A1 A1.5 A1.1 A1.6 A0.9 A1.1 A
Peak current per phase:(2)2 A2.2 A2 A1.6 A2.5 A2 A2 A4.5 A1.5 A1.3 A
Microstepping down to:1/161/321/321/161/81/321/321/2561/256
Board layer count:2444444444
Special features:high max
voltage,
high current
low-voltage
operation,
high current
AutoTune,
digital current
reduction,
high max
voltage
high currentdigital current
control,
high current
Auto Gain Control,
ADMD,
high max
voltage
Auto Gain Control,
ADMD,
high max voltage,
high current
128 and 256
microsteps,
high max
voltage
64, 128, and
256 microsteps,
low-voltage
operation
1-piece price:$5.95$7.49$8.95$5.95$6.95$5.95$5.95$7.75$9.95$7.75$5.95
1 On Pololu carrier board, at room temperature, and without additional cooling.
2 Maximum theoretical current based on components on the board (additional cooling required).

This category also includes several larger driver modules that generally can deliver more current and offer more features than the more compact drivers above:

TB67S279­FTG Full BreakoutTB67S249­FTG Full BreakoutAMIS-⁠30543TB67S128­FTGHigh-Power Stepper
Motor Driver 36v4
Driver chip:TB67S279­FTGTB67S249­FTGAMIS-30543TB67S128­FTGDRV8711
Min operating voltage:10 V10 V6 V6.5 V8 V
Max operating voltage:47 V47 V30 V44 V50 V
Max continuous current per phase:(1)1.2 A1.7 A1.8 A2.1 A4 A
Peak current per phase:(2)2 A4.5 A3 A5 A6 A
Microstepping down to:1/321/321/1281/1281/256
Board layer count:22222
Dimensions:1.0″ × 1.4″1.0″ × 1.4″1.0″ × 1.2″1.2″ × 1.6″1.3″ × 1.2″
Special features:Auto Gain Control,
ADMD,
high max voltage
Auto Gain Control,
ADMD,
high max voltage,
high current
SPI interface,
low-EMI PWM,
high current,
1/128 microstepping,
back EMF feedback
Auto Gain Control,
ADMD,
high max voltage,
high current,
1/128 microstepping,
optional serial interface
extra-high current,
high max voltage,
SPI interface,
1/256 microstepping,
back EMF feedback,
stall detection
1-piece price:$9.75$11.95$14.95$13.95$16.95
1 On Pololu carrier board, at room temperature, and without additional cooling.
2 Maximum theoretical current based on components on the board (additional cooling required).

For higher-level control of a stepper motor, consider our Tic Stepper Motor Controllers, which feature some of the same stepper motor driver ICs as our carrier boards combined with an on-board microcontroller that intelligently generates the low-level control signal in response to a variety of interfaces, such as USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, analog voltages for use with a potentiometer or analog joystick, and quadrature encoder for use with a rotary encoder dial. The Tics also offer a wide array of settings that can be configured over USB through a free software utility.

Subcategories

These breakout boards for STMicro’s STSPIN220 bipolar stepper motor drivers feature nine different microstepping resolutions down to 1/256-step, adjustable current limiting, and operation down to 1.8 V.

These breakout boards for STMicro’s STSPIN820 bipolar stepper motor drivers feature eight different microstepping resolutions down to 1/256-step, adjustable current limiting, and a wide operating range of 7 V to 45 V.

These breakout boards for Toshiba’s TB67S2x9FTG bipolar stepper motor drivers feature adjustable current limiting, adaptive gain control technology, seven microstep resolutions (down to 1/32-step), and more. They operate from 10 V to 47 V and can deliver approximately 1.2 A or 1.7 A phase without a heat sink (depending on the version).

These breakout boards for the MPS MP6500 bipolar stepper motor driver feature adjustable current limiting, over-current and over-temperature protection, and four microstep resolutions (down to 1/8-step). They operate from 4.5 V to 35 V and can deliver approximately 1.5 A per phase without a heat sink (driver is rated for up to 2.5 A per coil).

These breakout boards for TI’s DRV8825 bipolar stepper motor driver feature adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). They operate from 8.2 V to 45 V and can deliver approximately 1.5 A per phase without a heat sink (they are rated for up to 2.2 A per coil).

These Black Edition driverse are higher-performance drop-in replacements for the original A4988 stepper motor driver carrier. They feature a four-layer PCB for better thermal performance, allowing the A4988 microstepping bipolar stepper motor driver to deliver approximately 20% more current than our two-layer version.

These breakout boards for Allegro’s A4988 bipolar stepper motor driver feature adjustable current limiting, over-current and over-temperature protection, and five microstep resolutions (down to 1/16-step). They operate from 8 V to 35 V and can deliver approximately 1 A per phase without a heat sink (they are rated for up to 2 A per coil).

Drivers simple step stool

Products in category “Stepper Motor Drivers”

Pololu item #:3730
Brand:Pololu
Status:Active and Preferred
Free add-on shipping in USA
Free shipping in USA over $40

This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and can deliver up to 4 A continuous per phase without a heat sink or forced air flow (6 A max with sufficient additional cooling). The SPI interface allows configuration of the current limiting, step mode (9 step modes from full-step through 1/256-step), decay mode, and stall detection. The driver also provides back-EMF feedback that can be used for more advanced control and stall detection algorithms. Additional features include reverse-voltage, under-voltage, and over-current protection.

Drivers Simple Steps

Pololu item #:2998
Brand:Pololu
Status:Active and Preferred
Free add-on shipping in USA
Free shipping in USA over $40

This breakout board makes it easy to use Toshiba’s TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and microstepping down to 1/128-step. In addition, it has the ability to dynamically select an optimal decay mode by monitoring the actual motor current, and it can automatically reduce the driving current below the full amount when the motor is lightly loaded to minimize power consumption and heat generation. The driver has a wide operating voltage range of 6.5 V to 44 V and can deliver approximately 2.1 A per phase continuously without a heat sink or forced air flow (up to 5 A peak). It features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection (up to 40 V).

Pololu item #:2970
Brand:Pololu
Status:Active and Preferred
Free add-on shipping in USA
Free shipping in USA over $40

This is a breakout board for ON Semiconductor’s AMIS-30543 microstepping bipolar stepper motor driver, which features SPI-adjustable current limiting, 11 step modes (from full-step through 1/128-step), back-EMF feedback that can be used for stall detection or optional closed-loop control, and over-current and over-temperature protection. The board operates from 6 V to 30 V and can deliver up to approximately 1.8 A per phase without a heat sink or forced air flow (it is rated for 3 A per coil with sufficient additional cooling).

Pololu item #:2134
Brand:Pololu
Status:Active and Preferred
Free add-on shipping in USA
Free shipping in USA over $40

This is a breakout board for TI’s DRV8834 microstepping bipolar stepper motor driver. It has a pinout and interface that are nearly identical to those of our A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The DRV8834 operates from 2.5–10.8 V, allowing stepper motors to be powered with voltages that are too low for other drivers, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). This board ships with 0.1″ male header pins included but not soldered in.

Pololu item #:2874
Brand:Pololu
Status:Active and Preferred
Free shipping in USA over $60

This version of our DRV8834 Low-Voltage Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8834 Low-Voltage Stepper Motor Driver Carrier product page for more information about the driver.

Pololu item #:2971
Brand:Pololu
Status:Active and Preferred
Free add-on shipping in USA
Free shipping in USA over $40

Drivers Simple Steps

This breakout board for TI’s DRV8880 microstepping bipolar stepper motor driver features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/16-step). In addition, the driver’s current limit can be dynamically reduced to save power, and it has an autotune feature that automatically selects the decay mode that results in the smoothest current waveform. The carrier has a pinout and interface that are nearly identical to those of our A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The DRV8880 operates from 6.5 V to 45 V and can deliver up to approximately 1 A per phase continuously without a heat sink or forced air flow (up to 1.6 A peak). This board ships with 0.1″ male header pins included but not soldered in.

Related categories

Drivers Simple Step Stool

Motion Control Modules
Tic Stepper Motor Controllers
Stepper Motors
Brushed DC Motor Drivers
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Coments are closed
Scroll to top