1. Download the latest drivers, software, firmware, and diagnostics for your HP products from the official HP Support website.
  2. DriveSentry Inc Dropbox Duplex Secure Ltd DzSoft Ltd EAST Technologies eEye Digital Security Elaborate Bytes AG EldoS Corporation Emsi Software GmbH Eric Brewster ES-Computing ESE.
  3. # VID Decimal.
-->

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

The ID device 110 in some embodiments takes the form of a plastic card, such as a plastic card the size of a credit card or driver's license or other useful size, but the device 110 is not limited to a plastic device or to a particular size. Analog Devices Ultrafast 4 ns Single Supply Comparators MC AD8011.pdf 3878.00 ROHLEV ADG719-SOT236-CNLINEAR ADG719BRT-Analog Devices CMOS 1.8V to 5.5V 2.5? 2:1 Mux/SPDT Switch in SOT-23 MC ADG719.pdf 3878.00 ROHLEV AD5399-MSOP10050-CNLINEAR AD5399YRM-Analog Devices Twos Complement Dual 12-Bit DAC with Internal REF and Fast.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Drivers Cogelec Port Devices

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

Drivers Cogelec Port Devices Terminal

To resolve this issue, install update 4022716.

Method 2

Drivers Cogelec Port Devices Replicator

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

Drivers Cogelec Port Devices Lucie

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.

Coments are closed
Scroll to top