Your 4G Network Extender is fully operational when the LED light is solid blue and it displays says 'In Service' or 'Verizon 4G LTE.' Time Warner Cable Arris Router. How to configure your Time Warner Cable Arris Router to work with the Network Extender. Connect to the Arris network Connect your computer or smartphone using the Ethernet cable connection or Wi-Fi. An internet connection is necessary for you to set up any router. For easy connection, we recommend that you connect your computer to the Arris router using an Ethernet cable.

Before you begin

  • If you are setting up multiple products today, complete the setup of your gateway first.
  • If you are installing TiVo® too, you will want to set up your gateway near the TV where you will install your TiVo device.

FOLLOW THESE EASY INSTRUCTIONS TO SET UP YOUR NEW INTERNET SERVICE.

  1. DIFFICULTY

    Moderate
  2. TIME TO COMPLETE

    Under 20 Minutes
  3. REQUIRED EQUIPMENT

Note: If you have ordered Atlantic Broadband phone service, you will also need a phone cord, which will be included. Click here to download Phone Installation Instruction Guide


HOW TO SET UP YOUR ARRIS GATEWAY:

Follow these steps to connect your new gateway, the all-in-one device that allows you to utilize both wired and wireless (WiFi) devices.

  1. Locate cable wall outlet (coax) in a central location in your home. It will look like this:
  2. Connect coax cable from the wall to gateway A (insert into connector and turn barrel to tighten).
  3. Connect power cord from gateway to the wall outlet B. The gateway will update once powered on, which could take 10-15 minutes and your device may reboot. Once the top light is glowing steady, it’s ready to use.
  4. If you’re connecting a wired device, use the Ethernet cord provided from the gateway to the back of the device C.

Note: If you’re connecting Atlantic Broadband phone service, use the phone cord to connect your phone to the gateway D. Click here to download Phone Installation Instruction Guide


STEPS TO CONNECT TO WIFI:

To connect to your new WiFi network, you can keep the default WiFi network names and password OR you can rename them. To connect to the default WiFi network:

  1. Look for the label on the bottom of your gateway (example shown here). You’ll see both 2.4GHz and 5GHz “SSIDs” (5G SSID is in the yellow box), as well as a “Pre-Shared Key” or password (Pre-Shared Key for both networks in the blue box).

  2. Locate the unique 5G SSID on your gateway, and then select it from your available WiFi networks list. If you don’t see the 5G SSID listed, select the 2.4G SSID instead. Then input the password or “Pre-Shared Key” from your label. Your device is now connected to your home WiFi network!
  3. Repeat steps 2 and 3 to connect all the wireless devices in your home to your new WiFi network.

Note: To rename your new WiFi networks, please CLICK HERE for further instructions.

If you require assistance, call our Customer Support Team at 1-844-579-0697.

Arris Network & Wireless Cards DriverDrivers
Arris

CONTACT US

844-579-0697844-579-0697

QUICK LINKS

Self-Installation FAQs

Self-installation allows you to order your internet service and hook it up yourself with a self-installation kit. It gives you flexibility to do it on your own time at no additional cost. All of the equipment, cords, and instructions are included in the self-installation kit.

First, we’ll ship you a self-installation kit and send you an email with order confirmation and package tracking information. You should expect to receive the self-installation kit within 3-5 days, and it will have everything you’ll need to get your internet service up-and-running.

The self-installation kit includes a new gateway, power cord, coaxial cable, and instructions to help you do the installation. There is even an Ethernet cord in case you have a device that needs to be wired directly to the gateway.

Arris Network & Wireless Cards Driver

A gateway is a device that combines the functions of a modem and a router. The modem is the device that connects your connected device to the Internet. The router is a companion device to your modem that takes the information from your modem and sends it wirelessly to your WiFi devices like smart phones, tablets, gaming consoles, and computers.

Click Here to Download Internet: Gateway Instruction Guide [PDF] – Arris TG3452A

Simply follow the instructions included in the Ready-Set-Install Kit. Connect the coaxial cable from the wall to the gateway, then connect the power cord to the gateway and plug in. Your gateway will power up and set itself up automatically. When set-up process is complete, the top light on the front will be glowing steady. Then you can connect with either wired or wireless devices.

If you cannot connect your device wirelessly, you may connect directly to the gateway with the enclosed Ethernet cord.

No, it is optional. You can connect any wireless device by using the default Network Names (SSIDs) and Pre-Shared Key (password) displayed on the label on the bottom of the gateway.

Follow these steps to change the default WiFi network names and passwords:

  1. On your WiFi device:
    1. Open up an internet web browser (like Safari or Chrome).
    2. Type 192.168.0.1 into the address bar and hit enter/go.
    3. This will take you to an “Arris Home Network” page.

  2. On the Arris page:
    1. Create an ARRIS ADMINISTRATOR password to manage your new gateway’s settings. It must be at least 8 characters long with at least one uppercase and lowercase letter and one special character. Please note that this ARRIS ADMINISTRATOR password is NOT your WiFi password for your new WiFi network.
    2. Enter the CAPTCHA code.

  3. Create a WiFi name and password for both the 2.4GHz and 5GHz networks. Leave the encryption method as is (WPA2 PSK)

  4. On the next page, log in with the ARRIS ADMINISTRATOR username “admin” and the new ARRIS ADMINISTRATOR password you created in Step 2a. Now, go to the WiFi settings on your WiFi device:
    1. Select one of your newly created WiFi network names created in Step 3. You will be prompted to input the new WiFi password you set up at the same time.
    2. For the best experience, connect to both the 2.4 GHz and 5 GHz networks.
    3. Repeat this connection process on all of the WiFi devices in your home.

Make sure that the cords are tightly attached to the gateway and plugged into the wall. If it still does not power on try a different outlet.

Try unplugging your modem from the power outlet for 30 seconds and then plug it back in. Once it reboots, if you still cannot connect, please call 1-844-579-0697 for assistance.

The billing cycle automatically starts within 10 days of your order online, so if you run into any problems completing your installation, it is very important to call in for support at 1-844-579-0697 immediately. Promotional periods will be reflected on the billing statement.

If you’re connecting Atlantic Broadband phone service, use the phone cord to connect your phone to the gateway. For step by step instructions, click here to download Phone Installation Instruction Guide

Check that the phone cord is connected to the top phone jack on the gateway. If it is a cordless phone, you may also need to plug the phone base into an electrical outlet.

No. You must follow the set-up and activation instructions to get your Atlantic Broadband phone service running properly. See the instruction guide for the detailed steps.

5/5
ARRIS SURFboard SBG8300 DOCSIS 3.1 Gigabit Cable Modem & AC2350 Dual Band Wi-Fi Router
  • 3 products in 1: DOCSIS 3 1 Cable Modem, AC2350 Dual band Wi-Fi, 4 port Gigabit Router (cable digital voice service not supported)
  • Compatible with major U S Cable Internet Providers including Cox, Spectrum, Xfinity & others Cable internet service required Not compatible with ATT, Verizon, CenturyLink or other DSL or Fiber internet providers
  • 32 downstream x 8 upstream DOCSIS channels, 2 downstream x 2 upstream DOCSIS 3 1 OFDM channels Best for cable internet speed plans up to 4 Gbps. Cable internet service required
  • Wave 2 AC2350 dual-band concurrent Wi-Fi Router with 4 Gigabit Ethernet ports
  • Setup and manage your network with the SURFboard Manager app Add SURFboard skills to your Alexa network for voice management of your Wi-Fi settings
Arris Network & Wireless Cards Driver
  • 1 Gigabit Ethernet port for connection to a Wi-Fi router or other wired device
  • 2 telephone ports for Xfinity digital voice service
  • Certified to work with Xfinity internet & voice service Not certified for use with other cable internet service providers
  • DOCSIS 3 0 cable Modem with 32 downstream x 8 upstream channels, best for Xfinity cable internet speed plans up to 600 Mbps
  • Xfinity internet service required Does not include Wi-Fi

Arris Network & Wireless Cards Drivers

ARRIS SURFboard SBG10 DOCSIS 3.0 Cable Modem & AC1600 Dual Band Wi-Fi Router
  • 3 products in 1: DOCSIS 3 0 Cable Modem, AC1600 dual-band Wi-Fi Router, 2 Port Gigabit Ethernet Router (cable digital voice service not supported)
  • Wi-Fi 5 AC1600 dual-band concurrent Wi-Fi Router with 2 Gigabit Ethernet ports
  • Setup and manage your network with the SURFboard Manager app
  • Compatible with major U S Cable Internet Providers including Cox, Spectrum, Xfinity & others. Cable internet service required. Not compatible with ATT, Verizon, CenturyLink or other DSL or Fiber internet providers
  • 16 downstream & 4 upstream channels. Best for cable internet service plans up to 400 Mbps.

Arris Network & Wireless Cards Drivers

Arris TM822 (Series - TM822A) Touchstone Docsis 3.0 8x4 Ultra-High Speed Telephony Modem
  • Backwards compatible with DOCSIS 1.0, 1.1, and 2.0
  • Flexible 8×4 downstream/upstream channel-bonding with superior throughput
  • DOCSIS 3.0 certified
  • IPv4/IPv6 modes for DOCSIS CM
  • 10/100/1000 Base-T Ethernet
ARRIS SURFboard SB8200 DOCSIS 3.1 Gigabit Cable Modem
  • DOCSIS 3 1 Cable Modem best for cable internet speed plans up to 2 Gbps. Note, a 2nd IP address is required from your cable internet provider to reach 2 Gbps.
  • 32 downstream x 8 upstream DOCSIS 3 0 bonded channels, 2 downstream x 2 upstream OFDM DOCSIS 3 1 channels
  • Two 1-Gigabit Ethernet ports (Note, a 2nd IP address may be required by your cable internet provider to activate 2nd port)
  • Compatible with major U S Cable Internet Providers including Cox, Xfinity & others Not compatible with ATT, Verizon, CenturyLink or other DSL or Fiber internet providers
  • Cable internet service required Does not inlcude Wi-Fi and does not support cable digital voice service
ARRIS SURFboard SBG7400AC2 DOCSIS 3.0 Cable Modem & AC2350 Dual-Band Wi-Fi Router
  • 3 products in 1: DOCSIS Cable Modem, AC2350 dual-band Wi-Fi, 4 port Gigabit Router (cable digital voice service not supported)
  • Compatible with major U.S. Cable Internet Providers including Cox, Spectrum, Xfinity & others. Not compatible with ATT, Verizon, CenturyLink or other DSL or Fiber internet providers
  • 24 downstream & 8 upstream channels. Best for cable internet speed plans up to 600 Mbps. Cable internet service required
  • Wi-Fi 5 AC2350 dual-band concurrent Wi-Fi Router with 4 Gigabit Ethernet ports
  • Setup and manage your network with the SURFboard Manager app
ARRIS SURFboard T25 DOCSIS 3.1 Gigabit Cable Modem
  • Certified to work with Xfinity internet & voice service Not certified for use with other cable internet service providers
  • DOCSIS 3 1 Cable Modem with 32 downstream x 8 upstream DOCSIS 3 0 channels, 2 downstream x 2 upstream OFDM DOCSIS 3 1 channels
  • Two 1-Gigabit Ethernet ports and 2 Telephony ports for Xfinity digital voice service
  • Best for Xfinity internet speed plans up to 2 Gbps
  • Xfinity internet service required Does not include Wi-Fi
  • Requires cable internet service. Compatible with major U.S. Cable Providers like Xfinity, Spectrum, Cox, Suddenlink, Mediacom, etc. Not compatible with ATT, Verizon or CenturyLink.
  • 32 DOWNLOAD & 8 UPLOAD channels to future proof your modem as your Cable ISP enhances service offerings. Recommended for plans of 300 Mbps and above
  • Supports IPv4 and IPv6 – the latest Internet standard
  • 90 Day Warranty. ARRIS Certified Refurbished. US Technical support
ARRIS SURFboard SVG2482AC DOCSIS 3.0 Cable Modem & AC1750 dual-band Wi-Fi Router with Voice
  • 4 products in 1: DOCSIS 3. 0 Cable Modem, AC1750 Wi-Fi Access Point, 4-Port Gigiabit Ethernet Router & Xfinity Telephony Modem.
  • Approved for use with Xfinity internet & voice service. Not compatible with any other cable internet provider.
  • 24 downstream x 8 upstream DOCSIS 3.0 channels, best for Xfinity internet speed plans up to 600 Mbps
  • 4 Gigabit Ethernet ports, 2 telephony ports for digital voice service
  • Cable internet service required.
Coments are closed
Scroll to top